www.white-rodgers.com 20 relays and transformers type 124 single pole normally open, or single pole double throw contacts. dust resistant and endcaps are isolated from bracket specifications dimensions, 24-05 ,- 4 ,- 7 . . . . 3.56 l x 3. 3 w x 2.9 h dimensions, 24-305 ,-34 . . . . . . . . . . 4.69 l x 3. 3 w x 2.9 h weight , 24-05 ,- 4 ,- 7 . . . . . . . . . . 6.0 oz. weight , 24-305 ,-34 . . . . . . . . . . . . . . . . . 9.0 oz. temperature range . . . . . . . . . . . . . . . . . . . . . . -40 to +49f terminations, contacts . . . . . . . . . . . . . . . . . . . . 5 / 6 -24 unf-2a thread terminations, coil . . . . . . . . . . . . . . . . . . . . . . . . # 0-32 unf-2a thread recommended mounting . . . . . . . . . . . . . . . . . . . . . . . vertical plane with coil terminals up hardware torque, contact terminal . . . . . . . . . . . . . . . 60 in. lbs. max. hardware torque, coil terminal . . . . . . . . . . . . . . . . . . 2-8 in. lbs. caution : a back-up wrench must be used to hold the bottom nut stationary. type 124 coil coil contact rating (amps) C inductive load model duty terminal bracket voltage resistance contact voltage normally open normally closed number cycle type ? style d.c. (ohms) ? material d.c. continuous inrush continuous inrush 124-105111 continuous 4 standard 2 3.2 silver alloy 2 00 400 C C 124-114111 continuous 4 standard 24 53.0 silver alloy 24 00 400 C C 124-314111 continuous 6 standard 24 53.0 silver alloy 24 00 400 50 00 124-117111 continuous 4 standard 36 20.0 silver alloy 36 00 400 C C 124-317111 continuous 6 standard 36 20.0 silver alloy 36 00 400 50 00 ? 4 = isolated coil, spno 6 = isolated coil, spdt ? coil resistance in ohms @ 25c ? inrush current: current applied within the frst 1/2 second of contact closure type 586 single pole normally open, or single pole double throw contacts. water resistant and case is isolated from bracket specifications dimensions, 586- 4 ,- 7 . . . . . . . . . . . 3.69 l x 3.30 w x 2.90 h dimensions, 586-37 . . . . . . . . . . . . . . . . . 4.6 l x 3.30 w x 2.90 h weight , 586- 4 ,- 7 . . . . . . . . . . . . . . . . . 24.0 oz. weight , 586-37 . . . . . . . . . . . . . . . . . . . . . . . . . 26.0 oz. temperature range . . . . . . . . . . . . . . . . . . . . . . -40 to +49f terminations, contacts . . . . . . . . . . . . . . . . . . . . 5 / 6 -24 unf-2a thread terminations, coil . . . . . . . . . . . . . . . . . . . . . . . . # 0-32 unf-2a thread recommended mounting . . . . . . . . . . . . . . . . . . . . . . . vertical plane with coil terminals up hardware torque, contact terminal . . . . . . . . . . . . . . . 60 in. lbs. max. hardware torque, coil terminal . . . . . . . . . . . . . . . . . . 2-8 in. lbs. type 586 spno coil coil contact rating (amps) C inductive load model duty terminal bracket voltage resistance contact voltage normally open normally closed number cycle type ? style d.c. (ohms) ? material d.c. continuous inrush ? continuous inrush ? 586-105111 continuous 4 standard 2 2.0 silver alloy 2 200 600 C C 586-108111 ? continuous 4 standard 5 32.8 silver alloy 5 200 600 C C 586-114111 continuous 4 standard 24 84.0 silver alloy 24 200 600 C C 586-117111 continuous 4 standard 36 89.0 silver alloy 36 200 600 C C 586-120111 continuous 4 standard 48 336.0 silver alloy 36 200 600 C C 586-314111 continuous 6 standard 24 84.0 silver alloy 24 200 600 00 200 586-317111 continuous 6 standard 36 20.0 silver alloy 36 200 600 00 200 ? 4 = isolated coil, spno 6 = isolated coil, spdt ? coil resistance in ohms @ 25c ? inrush current: current applied within the frst 1/2 second of contact closure ? ideal for 2v charging systems note : caution must be used in coil selection for use in 2 volt sytems where battery charging may expose coil to continuous, higher-than-rated voltage. 5 volt coils are recommended. white-rodgers will not be responsible for consequences of misap - plied solenoids. dc power contactors spno/spdt
|